How to Fix iPhone 15 Pro Overheating During Wireless Charging

iPhone 15 Pro is a powerful device, but many users report it becoming hot during wireless charging. This can be frustrating and may even affect battery longevity.

The heat often stems from a combination of software background tasks, improper charging accessories, and physical factors like case insulation. When the phone is placed on a wireless pad, the battery charges and the processor may run intensive tasks, causing temperature to rise. In most cases a simple adjustment resolves the issue.

Here is a quick overview of the symptoms and the primary recommended fix:

  • Symptoms: Device becomes warm to the touch, charging speed drops, battery indicator shows temporary loss of power.
  • Primary fix: Use a certified charger, ensure proper alignment, and remove any thick case during charging.

Step-by-Step Solutions to Fix the Issue

Primary Solution: Use Certified Accessories and Proper Placement

  1. 1. Inspect the cable and adapter: Look for frayed wires, bent connectors, or signs of wear. Replace any damaged components with a certified USB‑C to Lightning or USB‑C to USB‑C cable as required.
  2. 2. Choose a certified Qi charger: Verify that the charger carries the Qi logo and is listed by the Wireless Power Consortium. Certified chargers regulate power more efficiently, reducing heat.
  3. 3. Remove the case: Thick or metal cases can trap heat. Take the phone out of its case before placing it on the charger.
  4. 4. Align the phone correctly: Place the device so that the charging coil in the phone aligns with the coil in the pad. Most chargers have a visual indicator or a sweet spot; experiment slightly if needed.
  5. 5. Set the charger on a flat, ventilated surface: Avoid placing the pad on a soft surface like a bed or couch. A hard, open area allows heat to dissipate.
  6. 6. Limit active use while charging: Avoid gaming, streaming, or running heavy apps during the charge cycle. If you must use the phone, pause charging until you finish.
  7. 7. Enable Optimized Battery Charging: In Settings > Battery > Battery Health, turn on Optimized Battery Charging. This feature learns your routine and delays charging past 80% until you need it, reducing heat buildup.

Fix 2: Update iOS and Reset Settings

Sometimes background processes cause excess heat. Ensure your iPhone runs the latest iOS version by going to Settings > General > Software Update. After updating, reset your charging preferences by navigating to Settings > Battery > Battery Health > Reset. This clears any corrupted power‑management data that may be forcing the charger to work harder than necessary.

Fix 3: Inspect Battery Health

If the battery is degraded, it can generate more heat during charging. Open Settings > Battery > Battery Health and check the maximum capacity. If it falls below 80 %, consider replacing the battery. A fresh battery charges more efficiently and produces less heat, protecting both the cell and the surrounding circuitry.

Next Steps for a Cool iPhone

By following the steps above, you should see a noticeable reduction in temperature during wireless charging. Remember that using certified accessories improves performance and extends the lifespan of your device. If you need a high‑quality charger, cable, or diagnostic tool, visit the Phone2Charger.com Store to browse our certified, fully tested catalog of high‑end chargers, cables, and diagnostic accessories that guarantee safe and flawless device operation.

Related Articles